Drain Flush 75-150mm 

The Water-Tite Drain Flush is the ultimate solution for all your drain cleaning needs. With the ability to safely and effectively flush out main, surface, sewer, and basement drains, this device is perfect for drains with diameters ranging from 75 to 150mm. Its reusable design and easy connection to a garden hose make it a convenient and cost-effective option. Keep your drains clean and clear with Water-Tite.

FEATURES :

• Drain Flush RDF36
  
• Safe,clean, easy and reusable.
  
• Durable design; plated steel parts will not rust
• No tools, hoses, or gauges are required for installation
• Hand tighten in seconds
  
• Item Code 115 83505
• Recommended water pressure is 40-80 psi
  
• Drain Flush should be stored in a cool dark place
• Start Range 75mm
• End range 150mm
  

Directions for use

• Connect drain flush to the garden hose.
  
• Feed drain flush as far as possible (minimum of 4") into the main drain closest to the clogged line.
  
• Slowly turn on the cold water to full force. As drain flush fills it expands, lodging in the drain pipe. Water pressure loosens and flushes the obstructions down the drain.
• Most clogs are best cleared through the clean-out plug outside or through the roof vent nearest the clogged line.
• If water flows from the opened clean-out, insert drain flush and proceed. If not, insert drain flush into the drain of clogged fixture. 
• Drain flush is easily extracted after turning off the water and removing the hose from the faucet to release the water pressure.